How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of special steps to install an additional ignition key. It requires dealer support using a handheld computer dubbed Tech-2. Then, a new transponder and key are required to be purchased.

Rotate your keys to prevent one from deteriorating faster than the other. This will keep your keys in perfect condition.

Replacement Case

Contrary to the classic Saab keys of old, the new keys have electronic components which makes it difficult to make a copy. This has made theft of cars much more difficult than twenty years ago. It has also made it more expensive to replace lost keys.

Saab 9-3 owners should have two keys that work. If one gets lost, it costs a lot of money to add another to the car because it involves replacing the CIM module and reprogramming the locking cylinders. Dealers charge between $100 and $200 for this.

There are ways to cut down on these high costs. Some parts providers can look up the code on a spare key (usually the same one that opens the doors and turns the ignition) and cut a new metal key blade at a fraction of the dealer’s cost. The key must be exactly the same as the original to allow it to work in your vehicle.

You can also replace the case yourself by following these steps. You’ll require an open-faced screwdriver and a lot of patience. With the screwdriver, pry away the plastic and take out the emergency key. Once the case is open, remove the electronic components and put them in your new case. Make sure to insert the correct key and badge back in the case too.

Replacement Battery

The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced quickly and easily. This DIY video from YouTube Cyclone Cyd shows how to replace the battery in the remote key fob in just four steps. This tutorial will work with any modern Saab key fob. However, the procedure might differ slightly.

The first step is to find the button that lets off the backup key on the fob. This button is usually located just below the Saab logo on the back of the fob. Use a flathead to insert the screwdriver into the small hole on this button. This will be enough to allow you to open the fob’s case to allow you to replace the battery.

Once the new CR1632 battery is installed then you can reassemble your remote key fob and then program it to your car. The entire process shouldn’t take more than one hour. saab key fob is a simple procedure that doesn’t require special tools.

The process can be a bit more complex if you lose your key, but it is possible. The dealer must read the car’s VIN and then order a replacement key blade and a TWICE module with the exact unique code. The dealer will then have to program the key using MDI, a new software tool.

Replacement Key Fob

The key fob comes with an internal battery that is used to lock and unlock your car. They have a limited life span and will eventually die. This is a frequent issue with all cars. The good news is you can replace the battery in all key fobs, and not have to replace the entire case. You can buy replacement fobs from Amazon that include all the electronics already installed, so you can just pop open the case and replace the batteries in the original case. It’s important to note that you’ll have to remove the emergency key first. you can accomplish this by inserting the screwdriver of a small flathead into the slot located in the middle of the case. The screwdriver should be moved around the case until it will split open, making it simple to remove.

If you’re about to replace the keys, ensure that you have spare keys, because this can cut down the total cost by a substantial amount. If you have an extra key, request the dealer to cut it and program it for your vehicle. This is a lot less expensive than purchasing a new key fob.

It is possible to add another key to your car in the event that you don’t have one, but it takes a great deal of research and effort. It will cost you a few hundred dollars to get an additional car key. The computer in the vehicle must also be programmed. This can be accomplished by a professional, but it is an expensive option for the majority of owners.

Replacement Ignition

In contrast to earlier Saab cars, the modern SAAB 9-3 models use an advanced alarm system that is dependent on a coded keys. If you lose your only key, it could be costly to get another one because the car must have a specific computer installed and also be programmed to accept a new key. Dealers can even charge hundreds of dollars to program the new key even if they’re unable to do it.

If you’ve lost your sole working key, a dealer will replace the computer in your car (known as the CIM or SAAB TWICE) to create the replacement, and will charge you a premium price for it. We can reprogram the current EEPROM inside your car’s computer to make it ready for an extra key. This will save you more than 50% of the price you’d spend at a dealer.

If you’ve owned a car like the SAAB 9-3 for a long time, you know that the ignition keys aren’t very durable. They can become extremely sticky, and the buttons can be ripped off at times and you should think about buying a new one if the one you have isn’t functioning properly. Luckily, replacing the ignition key isn’t as complicated as it sounds, and it is fairly easy to do using the proper tools.