How to Replace a Saab 9-3 Key

The Saab 9-3 has a good attraction for drivers. It is well-lit and has an impressive performance engine. It also has a top safety rating.

It is crucial to have two keys that work for your vehicle. It can be costly to replace a key in the event that you lose it.

How to replace the ignition Key in the Saab9-3

You’ll must replace your car key when it doesn’t turn. This guide will explain how to replace the ignition key on the Saab 9-3. You’ll have to replace the key, get a new reprogrammable cell, and then purchase a new casing for your key-fob.

As opposed to earlier models, modern Saab vehicles use a transponder in the key-fob instead physical key that can be used to unlock and start the car. The reprogrammable batteries in the key-fob eventually wear out, and they aren’t able to hold any charge. This is particularly applicable if you are using the same key for the same lock.

A professional locksmith can replace the battery with ease. If you have the right tools, and a little patience you can do it yourself. The first step is to take the key-fob off. This is accomplished by inserting a flathead screwdriver into the slot located in middle of the case. The plastic is brittle, and it is susceptible to being damaged.

After the case has been opened then you can prepare the new key by combining the lower portion of the old key and the transponder and banana on the new key. This will ensure that the new key is connected to the CIM correctly, which can be the difference in replacing the only key for your Saab 9-3.

How do I replace the ignition Key on the Saab 900

If you don’t have two keys you will need remove the dashboard and steering wheel to access the ignition. Start by disconnecting your negative battery cable. Once the battery is disconnected, it is possible to remove the trim and dashboard pieces that surround the steering wheel. Once the dash is removed, insert an opening with a screwdriver behind the ignition switch.

The ignition cylinder is equipped with a key lock, which can prevent the vehicle from starting if it doesn’t have the key inside it. If the ignition switch on your 900 isn’t working, check the key to determine whether it’s inside the lock or snared into the barrel of ignition. It’s also an excellent idea to rotate your keys regularly and keep them clean so that they don’t get bent.

Saab cars differ from other vehicles because they don’t have traditional metal keys. Instead, the car recognizes the electric signals of the key fob by a specific chip inside it.

If you lose only one working key fob the dealer will charge you the most expensive dollar for the replacement of the computer module (known as the CIM). We can reprogram the EEPROM of your current computer to make it accept new keys without the need for replacement. You’ll save more than 50% on the price of the dealer! This is the SAAB Key PROGRAM. Find out more about it here!

How to replace the ignition Key in a Saab9-5

The metal part of a traditional Saab key is easy to duplicate, and it’s not much of a barrier against theft of vehicles. The real security is the electronic component inside the key-fob. It has a chip inside that recognizes your car when it’s put into the ignition switch.

Saab’s anti-theft system has relied on this technology for over a decade. It’s not as effective as a physical lock for your door however, it makes the theft of your car a lot harder. Every Saab owner must keep a spare Saab key in their car.

Most new Saabs come with two keys right from the factory, but you can add more at a dealer through a special handheld computer referred to as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 cars, which have more modern, more advanced features that require a key-fob.

The dealer will replace the CIM or TWICE module of those vehicles if all keys are lost. They’ll charge you a high price to do it. saab 9-3 key not accepted contact service can reprogram your computer’s EEPROM to accept new keys without having to replace expensive modules.

How to replace the ignition Key on an XC90 Saab

If your SAAB 9-3 key fob starts having trouble turning the lock barrel it could be time to replace it. Fortunately, the process is rather simple and doesn’t need you to visit an agent. You can do it at home using a few basic tools.

First, you’ll need to prepare the new keys. Before you start, be sure that the anti-theft feature is disabled by placing blocks on your rear wheels, and then adjusting the handbrake. Then, you can put the key in the ignition and switch it to the on position which activates the accessories but does not start the engine. Repeat this procedure 5 times, then turn off the key on the “on” position.

You’ll then need to purchase an additional case for your key fob. They can be found at a variety of auto parts stores and are typically extremely affordable. You can get them with or without electronics, depending on the model.

To open the case, place a flathead screwdriver inside the slot located in the middle and gently work it. When you’ve split the case, you’ll be able to access all the internal electronics. To remove the electronics, use a small flathead screwdriver and attempt to pull them out in a gentle manner.